NPT 1" / TL=25,0mm

Stainless steel Hygienic Conduit Fittings

UL and Type 4X

E507026 | UL514B CSA22.2 No 18.3-12 CSA22.2 No 94.2-1S

UL50E

NSF/00

NSF1 | NSF/ANSI 169

NSF2 | NSF/ANSI/3-A 14159-1

GOST

GOST |

• Stainless steel Hygienic Conduit Fittings are used in all areas where cleanliness is a necessity.
Avoiding build-up of dirt is most important in the following industries:
• Manufacturing and packaging of food and pharmaceuticals
• Clean room technology
• Biotechnology
• Chemical industry
• Smooth finish prevents harmful micro organisms to adhere to the surface no threads are exposed,
• Cleaning of fittings is easier, faster and less expensive compared to traditional stainless steel cable glands,
• Upper protective cap avoids dirt to enter the system
• Suitable for high pressure steam cleaning

Products specifications

Material	Body and Cap	Stainless Steel 1.4305(AISI 303)
	Lock Nut	Stainless Steel 1.4305(AISI 303)
	Seal	TPE, according to FDA guideline 21 CFR 177.2600
	Pressure Ring	PA6 (Polyamide 6 )
	O-Ring	NBR
	Ferrule	Brass
Ingress Protection Rating		IP 65, IP 66
UL Environmental Rating		TYPE 1, 2 , 4 , 4X, 12, 12K, 13 acc. to UL 50E
Operating Temperature		Permanent	Intermittent
		-20 °C to +100 °C	-40 °C to +150 °C
Thread Type
		Metric EN 60423
		NPT ANSI B1.20.1
Remarks		O-ring available in Metric threads.
		For assembly from outside only, special tool is available on request.
		Smooth finish prevents harmful micro organisms to adhere to the surface.
		No threads are exposed.
		Cleaning of fittings is easier, faster and less expensive compared to -
		traditional stainless steel conduit fittings.
		Suitable for high-pressure steam cleaning.
		Other steel grades on request.
Outer	Thread Size (Male)	NPT 1"
	Thread Length (TL)	25,0 mm
	Ø (D)	52,7 mm
For Sealtite Nominal Size		1"
Spanner Width	Cap	46 mm
	Allen Screw a	24
	Crescent Wrench Body b	42 mm
	Lock Nut	46
max. Height (H)		53,5 mm
Part Number		BNHF1-04-L

NPT 1" / TL=25,0mm

Lock Nuts