M25x1,5 / TL=10,0mm / SW=28mm

ATEX

IMQ 13 ATEX 010X | EN 60079-0:2012+A11:2013, EN 60079-1:2014, EN 60079-7:2015, EN 60079-31:2014

IECEx

IECEx IMQ 13.0003X | IEC 60079-0:2011 ; IEC 60079-7:2006-07 ; IEC 60079-31:2013

TR RU

No TC RU C-TR.AA87.B.00941 | ГОСТ 31610.0-2014 ГОСТ IEC 60079-1:2013 ГОСТ IEC 60079-31:2013

IN METRO

DNV 14.0114 X | ABNT NBR IEC 60079-0:2013, ABNT NBR IEC 60079-7:2008 ABNT NBR IEC 60079-31:2014

MARINE APPROVAL

TAE00003WV | IEC/EN60079-0, IEC/EN60079-7, IEC/EN60079-31 IEC/EN 62444

Products specifications

Material	Body, Cap	PA 6 (Polyamide 6)
	O-Ring	CR (Chloroprene) , Silicone
Ingress Protection Rating
		IP 68 - 5 Bar, 30 min
		IP 66
Operating Temperature		Seal Material
		CR (Chloroprene)	Silicone
Ex-i		-40°C to +70°C	-60°C to +70°C
Equipment For
		Gas & Dust potentially explosive atmospheres
		Cable glands should be also used for intrinsically safe circuits Ex-i.
Suitable for use in
		Group II Gas Group IIC ZONE1/ZONE2
		Group III Dust Group IIIC ZONE21/ZONE 22
Equipment Marking
		Ex II 2GD
		Ex eb IIC Gb Ex tb IIIC Db
Marking Example *
		BMD TP-X... CE 0722 II 2GD Ex e IIC Gb Ex tb IIIC Db IP66/68
		Ta -40°C to +80°C IMQ 13 ATEX 010X IECEx IMQ 13.0003X
Impact Test Result		4J
Thread Type
		Metric (M) ISO Pitch 1,5
		NPT (N) ANSI ASME B1.20.1
Accessories		Lock nuts
		Gaskets ( Washers )
Remarks		We recommend the use of lock nuts and gaskets to ensure IP rating for -
		rough surfaces or through holes.
		Accessories must be ordered separately.
Outer	Thread Size (Male)	M25x1,5
	Thread Length (TL)	10,0 mm
	Ø (D)	32,0 mm
Spanner Width		28 mm
Height (h)		5,8 mm
Part Number		TPI-X2

Order Coding
Part Number Mandatory	Gasket (Washer) Option	Lock Nut Option
See table *Part number for blue cap is TPI-..	WC Chloroprene WS Silicone WF Fiber	L Lock nut
Example
TPI-X2	WC	L
* TPI-X02