M16x1,5 / 2,0-6,0mm / TL=8,0mm

Cable glands with integrated ventilation

GOST

GOST |

• Balances pressure differences between inside and outside of enclosure.
• Prevents damages, such as condensation due to pressure differences.
• Cable gland and pressure balance element combined in one product.
• Properties of ventilation membrane stay the same independent of cable diameter and torque.
• Membrane properties: hydrophobic, oleophobic.
• For industrial applications in harsh environments.
• Easy assembly.
• High quality strain relief and sealing, reliable performance for standard industrial applications.
• Up-to-date international approvals.

Products specifications

Material	Body , Cap	Brass Nickel plated
	Seal	CR ( Chloroprene )
	Clamping Insert	PA 6 (Polyamide 6)
	Vent. Membran	PTFE
	O-Ring	NBR
Ingress Protection Rating
		IP 66
		IP 67
Flammability		V2 according to UL94
Operating Temperature		Permanent	Intermittent
		-20 °C to +100 °C	-40 °C to +150 °C
Cable Type		Non Armoured
Thread Type
		Metric EN 60423
		PG DIN 40430
		Other thread types also available upon request.
Accessories		Lock nuts
		Dome plugs
		Gaskets
Remarks		Manufactured according to DIN EN 62444/50262.
		We recommend the use of lock nuts and gaskets to ensure IP rating for -
		rough surfaces or through holes.
		O-ring available in Metric and PG threads
		Accessories must be ordered separately.
		Some approvals do not cover all sizes.
		Note: Applications of most cable glands don't require same parameters -
		applied to tests. For applications strictly acc. to the approval definitions -
		Note: please consult data sheet.
Outer	Thread Size (Male)	M16x1,5
	Thread Length (TL)	8,0 mm
	Ø (D)	18,9 mm
Clamping Range Outer Sheath Ø min - max		2,0 - 6,0 mm
Average Air Flow for ΔP = 70 mbar/1 psi (l/h)		25
Water Intrusion Pressure (mbar)		0,1 bar
Spanner Width	Cap	17 mm
	Body	17 mm
max. Height (H)		29,0 mm
Part Number		BMBCVG-01R

M16x1,5 / 2,0-6,0mm / TL=8,0mm

Lock Nuts

Dome Plugs

Gaskets